|
|
1980 Yamaha XS 1100
Maintenance Log
| Details |
Mileage |
Date |
Description |
| |
18,000 |
8/23/2003 |
Motorcycle purchased |
| |
21,800 |
3/12/2006 |
Maintenance log started |
| Photos |
21,800 |
3/12/2006 |
New front tire |
| Photos |
21,800 |
3/12/2006 |
4 new carb boots |
| |
22,000 |
3/20/2006
|
Replaced oil and oil filter (10w40 synthetic blend) |
| |
23,000 |
6/12/2006 |
Patched hole in rear tire |
| Photos |
23,900 |
8/23/2006 |
New gel battery |
| Photos |
24,400 |
6/1/2007 |
Anual maintenance -
new valve shims,
changed engine oil. trans fluid, final drive fluid,
lubed control cables,
rebuilt front calipers and front master cylinder,
drained / filled / bled front brake system,
replaced front wheel bearings,
adjusted brake lever / pedal / clutch lever free play,
lubed rear brake pedal,
lubed centerstand pivots,
tightened exhaust bolts,
tightened cylinder head bolts,
new spark plugs,
new head gasket and cam chain tensioner gasket (seals weeped due to sythetic oil front last change),
new oil filter,
cleaned / regreased spedometer pickup at wheel
added engine guards and highway pegs
|
| |
26,000 |
4/18/2008 |
replaced oil with conventional 10w40 (synthetic was seaping out gaskets) |
| Photos |
26,800 |
8/15/2008 |
Added power outlet (cigarette lighter) |
| Photos |
27,100 |
8/30/2008 |
Replaced cam chain,
replaced oil drain plug washer,
replaced rear rotor with EBC Pro-Lite MD2024 rotor,
replaced rear brake pads with EBC Organic Pads FA34,
replaced cam chain tensioner cover gasket
|
| Photos |
27,100 |
9/10/2008 |
Replaced factor oil filter assebly with custom Spin-on Oil Filter Cooler Adapter (SOFCA). |
| Photos |
27,200 |
9/27/2008 |
Replaced all four exhaust gaskets, replaced missing cam chain tensioner oil plug, replaced missing rear fender nut and bolt |
| Photos |
27,300 |
10/11/2008 |
Removed exhaust and had shop weld 2 cracks. Bike now runs smothly again. |
| Photos |
27,600 |
3/8/2009 |
Annual maintenance.
Replaced spark plugs with 4 new NGK BP6ES spark plugs.
New oil filter (Fram PH3950) and oil (Mobil 5000 10w40).
Tightened cylinder head bolts.
Adjusted cam chain tension.
Inflated tires.
Adjusted valve shims for correct valve clearance. E1=280, E2=?, E3=?, E4=?, I1=270, I2=?, I3=?, I4=?
Cleaned and re-oiled K&N air filter. |
| Photos |
27,600 |
4/17/2009 |
Cleaned carbs with ultrasonic cleander, replaced float bowl gasket, verified proper float level, tried to balance carbs but failed due to #4 cylinder with no vacuum. |
| Photos |
28,100 |
6/6/2009 |
Installed oil cooler and fork brace. |
| Photos |
29,000 |
7/4/2009 |
Patched hole in rear tire. Removed and cleaned both petcocks using ultrasonic cleaner and carb cleaning solution. Shortened fuel lines. |
| Photos |
29,100 |
7/11/2009 |
Replaced front brake master cylinder (entire reservoir). Replaced front brake lines with stainless steel lines. Added DOT4 brake fluid and bled the lines. |
| Photos |
29,900 |
3/28/2010 |
Changed engine oil (10x-40) and oil filter. I love the SOFCA. |
| Photos |
30,000 |
4/11/2010 |
New rear tire, Dunlop D404 130/90-16 M/C 67H |
| Photos |
30,300 |
5/3/2010 |
Replaced side view mirrors
Replaced missing starter button |
| Photos |
30,300 |
5/19/2010 |
Polished alternator cover to a mirror finish (well, pretty darn close to a mirror) |
| Photos |
30,300 |
5/19/2010 |
Installed Mac 4 into 2 exhaust system to replace my rusted out exhaust |
| Photos |
30,300 |
5/23/2010 |
Replaced my ripped OEM seat cover with an aftermarket Saddlemen seat cover (saddleskins) |
| Photos |
30,700 |
7/17/2010 |
Replaced cracked stainless steel brake line |
|
